Olimpia splendid Peler Chill, Instructions For Installation, Use And Maintenance Manual, Page: 24 / 86

EN - 10
ENGLISH
E - Front grill rotation key
When the cooler is running, press the “E Swing” button to rotate the front grill. This
allows better air circulation. Press the button again to deactivate the function.
F - Humidifier function
When the cooler is running, press the “F Mist” button to activate the humidification
function. The display shows the function is active and the green light switches
on. If the water level in the tank goes below the minimum level, the light turns
red and the function deactivates. Press the “F Mist” button again to deactivate
the function. This function is independent and can be activated while the cooler
is off.
G - Repellent function key
When the cooler is running, press the “G Mosquito” button to activate the mos-
quito repellent function. The display shows the function is active. This function is
independent and can be activated while the cooler is off. To operate correctly, a
mosquito repellent plate (not included) must be inserted into the housing 10 (see
p. 4) on the back of the cooler.
H - Ionizer function key
When the cooler is running, press the “H Ionizer” button to activate the ionizer
function. The display shows the function is active. Press the key again to deac-
tivate the function. This function is independent and can be activated while the
cooler is off.
4- EVERYDAY MAINTENANCE
1
. Disconnect the appliance from the mains.
2 . Check the fan is off.
3 . Drain the water out of the tank and clean the tank using a wet cloth or a
brush.
4 . Use a soft cloth to clean the outer surface of the appliance.
If necessary, use a soft cloth with tepid water and neutral detergent (do not
use petrol, alcohol, diesel oil or similar), then dry thoroughly.