Bi2 WALL AR 1000/1200/1400
EN - 13
ENGLISH
e.
Hang the appliance on the bracket and fix it to the wall.
f.
Carry out the hydraulic connection and condensation drain.
g.
Carry out the electrical connection and the configuration.
h.
Reassemble the front shell.
i.
Check for correct operation of the appliance.
3 - INSTALLATION
3.1 - INSPECTING AND HANDLING THE UNIT
At delivery, the package should be checked and any dam-age should be reported
immediately to the carrier claims agent. When handling the unit, take into account
the following:
a. Fragile product, handle with care.
b. Choose the path to be followed for unit transport in advance.
c. Transport the unit by keeping it as long as possible inside its original pack-
aging.
3.2 - INSTALLATION OF THE APPLIANCE
3.2.1 - Place of installation
Before installation of the unit, check with the user for the possible
presence of cables, hydraulic or gas hoses, etc. inside the wall or
floor to avoid damages caused by installation.
Avoid installation in the following places to avoid inconveniences:
•
Environments with high concentration of oils for machinery.
•
Brackish environments, such as coastal areas.
•
Environments with high concentration of sulphurous gases, such as spa facilities.
•
Places where high frequency machinery is present, such as wireless equipment,
welding machinery and medical equipment.
•
Environments with the presence of combustible gases and hazardous substances.
•
Places with special environmental conditions.
•
The environment must not be exposed to strong electro-magnetic waves.
•
The place of installation must be distant from sources of heat, steam and inflam
-
mable gases.
Before installation, make sure that:
•
The area with inlet and outlet connections must be free from obstructions.
•
Make sure that curtains or other objects do not obstruct the air suction filters.
•
The place of installation must be able to support the indoor unit.
•
The place of installation must allow easy maintenance.
Summary of Contents for Bi2 WALL AR 1000
