Olimpia splendid Bi2 Series, Instructions For Use And Maintenance Manual, Page: 82 / 88

3.0 H
0 h 3.0 H
EN - 20
ENGLISH
E6HWWLQJRIWKHVZLWFKLQJRႇWLPHUIURPUHPRWHFRQWUROOHU
a . With the unit set to any operating mode, press key “ B9 ” to set the
desired delay (from 1 to 24 hours) after which the unit will switch off
VWDUWLQJIURPWLPHUFRQ¿UPDWLRQ
b . If no key is pressed within 5 seconds, the timer setting function will
end automatically.
d . The remote controller display shows the countdown for switching off
while the display of the fan coil shows the message “tI”.
Once the set time passes, the unit will switch off.
3.12 - SWITCHING OFF FOR PROLONGED PERIODS
If the appliance is not used for a prolonged period of time, it is necessary to carry out the following operations:
a . Set the main switch of the system to “off”.
b . Close the water valves.
c . If the risk of frost exists, make sure that antifreeze liquid has been added to the system, empty the system
otherwise.
The antifreeze function is not active.
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning intervention, disconnect
the unit from the mains supply by switching the main power switch off.
Wait for the components to cool down to avoid the danger of burns.
3HULRGLFPDLQWHQDQFHLVHVVHQWLDOLQRUGHUWRPDLQWDLQWKHIDQFRLODOZD\VHI¿FLHQWVDIHDQGUHOLDEOHRYHU
time. Some maintenance operations can be carried out every six months, others every year, by the Technical
Assistance Service, which is technically authorized and prepared and also has, if necessary, original spare
parts available.
4.1 - CLEANING
4.1.a - Cleaning the appliance
a . It is possible to use a cloth soaked in cold water to clean the appliance if the latter is very dirty.
Do not use abrasive sponges or abrasive or corrosive detergents not to
damage the varnished surfaces.