MEMORY ALARM
With the INHIBIT line connected to positive input, when turning off the control panel, will be displayed the
1st alert occurred, and the relative LED will turn on. The alarm memory will be reset every time the control
panel will be turned on.
INSTALLATION
At first start you will see an alternate flashing of the three LEDs (stabilization of the sensors).
At the end of the flashing, the sensor will enter in normal operation:
The green LED will indicate the alert of the infrared section
The yellow LED will indicate the alert of the microwave section
The red LED will indicate the alarm condition of the detector
If on the clamp "I" it is present a positive signal, usually connected to the teOff of some power
plants, the LEDs will take on memory function and the detector will be inhibited to the operation.
7
Side view
Coverage Area
Top view
Summary of Contents for BS-272
Page 3: ...INHIBIT Led 3 Led Led Led Led 3...
Page 4: ...2 1m 4...
