OLIMEX© 2017
PIC32-EMZ64 user's manual
•
Fast wake-up and start-up
•
Power Management
•
Low-power modes (Sleep and Idle)
•
Integrated Power-on Reset (POR) and Brown-out Reset (BOR)
Memory Interfaces
•
50 MHz Serial Quad Interface (SQI)
Audio and Graphics Interfaces
•
Graphics interfaces: PMP
•
Audio data communication: I2S, LJ, and RJ
•
Audio control interfaces: SPI and I2C
•
Audio master clock: Fractional clock frequencies with USB synchronization
High-Speed (HS) Communication Interfaces (with Dedicated DMA)
•
USB 2.0-compliant Hi-Speed On-The-Go (OTG) controller
•
10/100 Mbps Ethernet MAC with MII and RMII interface
Security Features
•
Advanced memory protection:
- Peripheral and memory region access control
Direct Memory Access (DMA)
•
Eight channels with automatic data size detection
•
Programmable Cyclic Redundancy Check (CRC)
Advanced Analog Features
•
12-bit ADC module:
- 18 Msps with up to six Sample and Hold (S&H) circuits (five dedicated and one shared)
- 24 analog inputs
- Can operate during Sleep and Idle modes
- Multiple trigger sources
- Six Digital Comparators and six Digital Filters
•
Two comparators with 32 programmable voltage references
•
Temperature sensor with ±2ºC accuracy
Communication Interfaces
•
Two CAN modules (with dedicated DMA channels):
- 2.0B Active with DeviceNet™ addressing support
•
Six UART modules (25 Mbps):
- Supports up to LIN 2.1 and IrDA® protocols
•
Six 4-wire SPI modules (up to 50 MHz)
•
SQI configurable as an additional SPI module (50 MHz)
•
Four I2C modules (up to 1 Mbaud) with SMBus support
•
Parallel Master Port (PMP)
•
Peripheral Pin Select (PPS) to enable function remap
Timers/Output Compare/Input Capture
Page 12 of 28
