OLIMEX© 2012
MSP430-T5510 User's Manual
6.4 MINI USB
Note that this is not USB OTG (On-The-Go).
Pin #
Signal Name
1
+5V
2
D-
3
D+
4
Not connected
5
GND
6.5 Jumper description
Please note that the jumpers on the board are ONLY SMD type. For setting the SMD jumpers
please consider that if you feel insecure of your soldering/cutting technique it is better not to try to
adjust those jumpers.
6.6.1 P_OUT/P_IN
When in position P_OUT, the board gets powered by SBW debugger.
When is position P_IN, the board gets powered by other sources.
The default position is P_OUT.
6.6.2 3.3V_E
When open 3.3V_E the processor doesn't receive power. Processor pins 11 and 28 are disconnected
from the power circuit.
The default position is closed.
6.6.3 AGND_E
When open AGND_E disables the analog ground signal.
The default position is closed.
Page 17 of 27
