INTRODUCTION:
MOD-RFID1356
is an RFID station, able to interact with ISO15693
compliant VICC transponders. All the complexity of RFID tag detection,
verification and decoding are handled by MOD-RFID1356. Custom
command requests can be initiated to facilitate VICC EEPROM read and
write operations.
MOD-RFID1356 supports two distinctive modes of operation, easily
switched by a single button press. It can emulate USB HID keyboard and
input the read TAG ID directly to any Windows application, including the
venerable Notepad. Or it can emulate USB CDC serial port for easy access
from custom user applications using standard code for COM port access.
FEATURES:
-
Supports ISO15693 compliant VICC transponders like EM4034.
-
Base RFID frequency 13,56MHz;
-
USB port connection to PC;
-
Two modes of operation, easily changed by pressing the button;
-
USB HID keyboard emulation mode;
-
USB CDC serial port emulation mode;
-
Simple command-line interface in USB CDC mode for configuration,
data acquisition and initiation of custom command requests;
-
Two LEDs indicating device status and tag presence;
-
Support for continuous and periodic RF scanning to better suit user
power requirements;
-
Ships with default mode USB HID and default configuration:
continuous read, scan always, LEDs activated;
ELECTROSTATIC WARNING:
The MOD-RFID1356 board is shipped in protective anti-static packaging.
The board must not be subject to high electrostatic potentials. General
practice for working with static sensitive devices should be applied when
working with this board.
REQUIREMENTS:
Cables:
1.8 meter USB A-B cable.
Software:
Software needed for USB HID keyboard mode:
-
Notepad or other text editor.
Software needed for USB CDC mode:
-
HyperTerminal or other terminal program.
electronic components distributor
