OLIMEX© 2018
A20-OLinuXino-MICRO user's manual
CHAPTER 7: SCHEMATICS
7. Introduction to the chapter
In this chapter is located information about the schematics describing logically and physically A20-
OLinuXino-MICRO.
7.1 Eagle schematic
OLinuXino schematics may be found it on the OLinuXino's GitHub repository:
https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A20-OLinuXino-MICRO
You can download the whole repository as .zip without having a GitHub account.
Please note that the schematics of A10 (not to be confused with A10s) and A20 boards are the same
since the two Allwinner processors are pin-to-pin compatible (drop-in replaceable). This means that
schematics for older hardware revisions of A20-OLinuXino-MICRO can be found in the GitHub
folder for A10-OLinuXino-MICRO.
We mostly use Eagle by Cad Soft 4.16r2 for designing. However, the files should be compatible
with the latest Eagle available. Cad Soft offers a trial version of their software that allows you to
inspect schematics and board files (without being able to modify them).
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License.
To view a copy of this license, visit
http://creativecommons.org/licenses/by-sa/3.0/
If you are looking for a schematic of an older revision of the board and it isn't available at our web
site you may request it by the support e-mail.
Page 46 of 56