OLIMEX© 2015
A20-OLinuXino-MICRO user's manual
Important: In some Debian images it is possible that the Ethernet doesn't get auto-detected during
boot-up. This is done on purpose because if there is auto-detection enabled and you don't want to
use the Ethernet connector or you have forgotten to plug a cable the start-up would be greatly
delayed. This might be problem in the first start-up to users counting only on SSH connection. You
can enable the Ethernet after a successful boot-up with:
ifconfing -a
dhclient eth#(as seen after after the ifconfing command)
Important: You can configure static/DHCP-given IP addresses in /etc/network/interfaces
Ethernet
Pin #
Signal name
1
TD+
2
TD-
3
VDD
4
NC
5
NC
6
VDD
7
RD+
8
RD-
LED
Color
Usage
Right
Green
Link status
Left
Yellow
Activity status
Page 35 of 56
