![background image](http://html1.mh-extra.com/html/olimex/a10-olinuxino-lime-4gb/a10-olinuxino-lime-4gb_user-manual_3754003041.webp)
OLIMEX© 2015
A10-OLinuXino-LIME user's manual
8.2 Board revision
Remember to check the schematics and the board design files to compare the differences.
Board revision
Notable changes
A
Initial release of the board
B
R12, R13 (ODT, RST) resistors are now mounted (were NA before) with
0R value otherwise the board doesn't start.
C
1. PC3/PB1 is now properly labeled as PC3/PB8 both on the schematic
and the print
2. Added R73 – 10M in parallel to the 32768 crystal
3. Added 2 FET transistors and MCP130 for switching directly
ex5V without voltage drop
4. USBDRV0 goes through 3 pin SMD jumper(PB9/PH7) for compatibility
5. GPIO3(pin9) comes from the 3 pin jumper PH7/PB9 for
compatibility
6. 10k resistors package changed from 0603 to 0402
7. The NAND is moved a bit so there is lower chance of short-
circuit
8. Added a NA resistor between PC16/NWP of the processor and 19 pin
#WP of the NAND
9. Added R77 pull down for MCP130
Page 41 of 46