OG 110114 P2
R
Step 4: Attaching the Blower Motor
• Locate the blower motor, gasket and (3) mounting bolts.
• Place the gasket between the blower motor and the air chamber surface located in the center of the
bottom side of the playfield.
• Line up the holes in the base of the blower motor with the pre-drilled holes in the air chamber and
tighten all (3) bolts.
• Plug the blower motor into the wall.
Step 5: Flip Table Over
• Check that all the leg levelers are screwed all the way into the legs.
• Carefully lift up and rotate the table onto its legs.
* DO NOT ALLOW WEIGHT OF TABLE TO ROCK ON ANY ONE OR TWO LEGS ALONE.
* We recommend that (2) or more people lift the table together.
Step 6: Manual Scoring Assembly
• Locate the top rail with pre-drilled holes to the left and right of the electronic scoring unit area.
• Using the (2) score posts, (1) score rod and beads, attach each assembly to this rail.
• The black scoring assembly contains (4) black beads and (1) red bead and should be placed at one
end of the rail.
• The red scoring assembly contains (4) red beads and (1) black bead and should be placed at the other
end of the rail. The odd colored bead signifies the final point in a game and should be placed so that it
is the last bead pulled toward you.
Step 7: Power the Game
• The blower motor should be plugged into the wall.
Step 8: Level the Game
• Adjust the leg levelers until the puck floats true on the playing surface.
• For more precise leveling, use a level.
• Place the level horizontally on the playing surface pointing towards the goal openings.
• Check that all the levelers are screwed all the way in as a starting point.
• Evenly adjust eh leg levelers on one end until you are horizontally level.
• Turn the level 90 degrees so it is pointing towards the scoring unit.
• Evenly adjust the levelers on one side of the table until it is vertically level.
Specifications subject to change without notice.
Assembly Instructions
continued for
OG EURO
