STEP 5:
On all tables with width larger than 700mm, secure the pull bar with
the supplied washer and screw in the location pictured above (slot end
closest to the pull-bar). Leave screw 1 turn from tight so the pull-bar
can be operated smoothly.
STEP 4:
Fully tighten all 6 screws on each mechanism.
STEP 3:
Ensure the frame is located in the centre of the worksurface.
COMPLETE:
Using 2 people rotate table into upright position.
MODULUS FILP TABLE
Installation Guide
Recommended
2-person Step
