WM30D Wall Mount Kit (Optional)
(Display)
3
(Display)
4
(Display)
6
1. Lay the display panel, face down on a
protected surface.
2. Aim at the display wall mounting holes
vertically with the left and right display
brackets.
3. Using the screws, lock washers, and
square multi-mount washers supplied to
secure the display brackets to the display
and them tighten them.
Note: Do not over tighten the bracket
mounting screws.
1. Lift the display with the brackets
attached onto the wall mounting plate.
2. Make sure the top and bottom of the wall
mounting plate are placed into the display
brackets slots.
3. Insert the locking bar from left to right
direction with the locking holes facing up
to match the holes in the wall mounting
plate.
1. Using the screws to secure the locking
bar and the wall mount plate and then
tighten them.
2. Make sure the display brackets engage
the rails on the wall mount plate.
1. Turn both of the tri knobs on the display
brackets.
2. Slide the unit attached on the display
brackets gently to adjust the best viewing
angle (up to 15 degree).
3. After the adjustment is complete, tighten
both of the tri knobs.
5
(Display)
72