+
-
9-30 V
Jumper required if using
a single power source.
If the Digital Input requires higher
than 4.7 V, use an external pull-up
resistor (10 K, up to 30 V max)
Open/Off > 4.7 V
Closed/On = 0 V
DI
COM
Digital Level Input
NPN
+
-
9-30 V
Jumper required if using
a single power source.
Open-drain with +5 V internal pull-up
Vout max = 4.7 V
Open/Off = 4.7 V
Closed/On = 0 V
DI
COM
Digital Level Input
Internal pull-up
NPN
Jumper required if using
a single power source.
NPN
NPN
15. Digital Level Output - Active Low
16. Digital Level Output - Active Low
10 K
External pull-up
+
+
-
-
9-30 V
COIL
VIN
COM
PLC Voltage Input
Relay
10 K
Pull-Down Resistor
(Optional)
©2020 OleumTech Corpora�on. All rights reserved. OleumTech and WIO are registered trademarks of OleumTech Corpora�on in the United States.
Specifica�ons, design, product descrip�ons, and availability subject to change without no�ce.
Quick Start Guide
Modular Wireless I/O System
- RM1K
80-3143-001_H
17. Digital Level Output - Active High
www.prosoft-technology.com
1.661.716.5100
Go to wio.oleumtech.com to download the full
User Guide for detailed installa�on and other
helpful informa�on. Advanced User Interface
So�ware is also available at the site for download.
4-20 mA
Analog
Input
V-
SIG-
SIG+
V+
+
-
Ext Power
18. 4-20 mA Output
14.
NPN Output
Jumper required if using
a single power source.
Open-drain (NPN) Outputs
Inductive Load (Sink Current):
1 Amp/30 Vdc
Relay
+
-
+
-
9-30 V
