9
OIL FILLED OPTIONS
8
OIL CHECKING PROCEDURE
9
WARNING
DO NOT overfill past the maximum dipstick mark.
1
Unscrew the dipstick and remove from the
GREY
on
Figure 5
).
2
Wipe dipstick clean.
3
Re-insert the dipstick
DO NOT
screw down.
4
Remove dipstick and inspect level. The oil
level needs to be between the maximum and
minimum marks indicated on the dipstick as
shown in
Figure 4
.
5
Once oil level is correct replace dipstick and
securely fasten.
The oil level must be correct and needs to be checked
using the following procedure:
The oil must be within the correct operating range for
If further oil is required after checking refer to Oil
Filling Procedure
Section 7
.
Figure 5
