OLED PU-27, Operating Manual, Page: 3 / 21

3
Introduction .
This Operating Manual is part of the documentation for hydronic pre-heaters and air
heaters (hereinafter referred as the product). The Manual contains information for the user
on safe maintenance of the product.
This control panel is compatible with the following products:
pre-heaters:
•
14ТС-10
•
14ТС-mini
•
BINAR-5S
air heaters:
•
Planar 2D
•
Planar 4D
•
Planar 44D
•
Planar 8D
For detailed information on product models supported, please visit www.autoterm.ru
In case of any problems, we strongly recommend that you contact authorized service
centers, the addresses and phone numbers of which you can obtain from the seller or on the
www.autoterm.ru website.
Before operating the pre-heater, read this operating manual and the
pre-heater (heater) operating manual.
Warranty and liability .
The manufacturer will not be liable for defects and damage caused by failure to follow
the product installation and maintenance instructions.
•
The control panel can only be used to control products from the list of compatible
products.
•
Do not connect and disconnect the control panel connector while the product is
operating.
•
After the product is switched off, it should not be switched on again for at least 5–10
seconds.
•
For safe product operation, after two unsuccessful attempts to start the product in a
row, contact the service department for troubleshooting information.
•
The warranty operating period of the control panel is 18 months from the date of sale,
provided the operation, transportation and storage rules are followed by the consumer.
•
The warranty storage period is 24 months from the product packing date.
•
In the absence of a company stamp indicating the sale date, the warranty period is
calculated from the date of manufacture.
This warranty does not cover defects appearing as a result of:
- force majeure circumstances, including lightning strike, fire, flood, impermissible
voltage surges or traffic accidents;