MP309 User manual
8
1.
Connect the charger to the connection jack of the phone in proper
direction, and connect the charger to a main socket.
2.
The phone displays "Charger Connected!" and starts charging after
properly connected. The battery icon displays the charging process. In
switch‐off state, the phone dynamically displays the charging process.
3.
When the battery is fully charged, the charging process stops
automatically, and the battery icon indicates full grid on the screen.
After the battery is fully charged, remove the charger from the phone
and socket as soon as possible.
Note:
Do not change the parts and accessories of the battery or take off the
battery cover for safety.
Use only original batteries and charging devices. Otherwise it may
result some damages to health and property.
Do not charge batteries in too high or too low temperature.
Do not use the phone while charging.
After pulling out the battery, date and time will be reset to default
values (factory settings).
T-Flash card
T‐Flash card is a kind of multimedia memory card
Switching the Phone on and off
To switch on and off the phone, please press and hold the power on/off
key on the top of the handset. If you switch the phone ON without
inserting the SIM card, then the phone will remind you to Insert SIM
Card.
Even though INSERT SIM CARD displays on screen user can still use all
other features except SIM features.
Then the following notices will appear on the screen in sequence after
inserting the SIM card and switching on the phone:
Enter the phone lock password—if you have set phone lock password
on.
Enter PIN—if you have set SIM card password on.
Search the network—the phone will automatically search the network
until it connects to the appropriate network
