M182 User manual
10
Your device supports T-Flash card, which is a multimedia memory
card used to multiply the memory of the device. The T-flash card is
small and should be pulled out and installed carefully and prudently
in order to avoid any kind of damage.
Switch off your device.
Remove the battery cover.
Slide the T-Flash card into the slot.
Attach the battery.
Push the battery cover until it clicks into place.
Charging the Battery
The device prompts a warning tone and message stating insufficient
battery when the battery power of your device is low.
Please follow the instructions mentioned below to charge your device:
Plug the connector of the charger into the jack of the
device.
Plug the charger into a standard AC wall outlet.
Note: When power charging is shown on the screen, it indicates that there is
not enough power and you should now charge your device. When charging is
complete, the battery icon will stop flashing. You must fully charge the battery
before using the device for the first time. It is recommended to charge the
battery for four hours before using the device for the first time. If the device is
turned on during charging, you can still make or answer calls, but this will
consume battery power, thus will extend the charging time of the device.
