Oldsmobile SILHOUETTE GTK 2004 Owner'S Manual Download

Page: 323 / 462

Then, without shutting off the engine, follow these steps:

The dipstick is located toward the back of the engine
compartment, next to the brake master cylinder
reservoir.

The dipstick has a bright, red loop design for easy
identification. See

Engine Compartment Overview on

page 5-12 for more information on location.

1. Pull out the dipstick and wipe it with a clean rag

or paper towel.

2. Push it back in all the way, wait three seconds

and then pull it back out again.

3. Check both sides of the dipstick, and read the

lower level. The fluid level must be in the
cross-hatched area.

4. If the fluid level is in the acceptable range, push

the dipstick back in all the way.

5-21

Summary of Contents for SILHOUETTE GTK 2004















































































































































































































































































































































































































































































Search results

Summary of Contents for SILHOUETTE GTK 2004

Reviews:

Related manuals for SILHOUETTE GTK 2004

Brands by name

Popular brands

Oldsmobile SILHOUETTE GTK 2004, Owner'S Manual

Search results

Summary of Contents for SILHOUETTE GTK 2004

Reviews:

Related manuals for SILHOUETTE GTK 2004

Brands by name

Popular brands