2-17
Mode 3: Last Door Closed Locking Only (If the power
door lock switch or remote lock control transmitter
(if equipped) is used to lock the vehicle while any door
or the liftgate is open, you will hear three chimes. The
doors will not lock. Five seconds after the last door is
closed, all doors and liftgate will lock.)
Mode 4: Both Features On (This combines Modes 2
and 3.)
Vehicles are delivered programmed in Mode 4.
To change the mode:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Press UNLOCK on the power door lock switch.
3. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is in.
You can change the mode by pressing
UNLOCK again.
4. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Remote Driver’s Unlock Control
With the remote driver’s unlock control feature, you can
program your vehicle to do the following:
D When you press UNLOCK on your remote lock
control transmitter, the driver’s door will unlock and,
D When you press UNLOCK on your remote lock
control transmitter again within five seconds, all
doors and the liftgate will unlock.
To customize this feature to your preference, see
“Programmable Modes” following.
Programmable Modes
Your vehicle can be programmed to one of the
following modes.
Mode 1: Remote All Doors Unlock (When you press
UNLOCK on your remote lock control transmitter,
all doors and the liftgate will unlock.)
Mode 2: Remote Driver’s Door Unlock Only
(When you press UNLOCK on your remote lock control
transmitter once, the driver’s door will unlock. When
you press UNLOCK on your remote lock control
transmitter again within five seconds, all doors and the
liftgate will unlock.)
Vehicles are delivered programmed in Mode 2.
Summary of Contents for 2000 Silhouette
