Oldfield 6750 User Manual Download Page 4

4

Important Safety Instructions 

Δ

 For your safety read, retain, and follow all instructions. Heed all warnings. 

Δ

 Only connect the power supply cord to an earth-grounded AC receptacle.  This amplifier is designed to 

operate on standard North American 115V AC and should only be plugged in to a receptacle meeting 
those specifications. 
  

Δ

 

WARNING: 

To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture. 

Δ

 Unplug the power supply cord before cleaning the unit exterior (use a damp cloth only). Wait until the 

unit is completely dry before reconnecting it to power. 

Δ

 Maintain at least 6 inches (15.25 cm) of unobstructed air space behind the unit to allow for proper 

ventilation and cooling of the unit. 

Δ

 This product should be located away from heat sources such as radiators, heat registers, or other 

products that produce heat. 

Δ

 This product may be equipped with a polarized plug (one blade wider than the other) or a three-prong 

grounded plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact an 
electrician to replace your obsolete outlet. Do not defeat the safety purpose of this plug. 

Δ

 Protect the power supply cord from being pinched or abraded. 

Δ

 This product should only be used with a cart or stand that is recommended by the manufacturer. 

Δ

 The power supply cord of this product should be unplugged from the outlet when left unused for a long 

period of time, or during electrical storms. 

Δ

 This product should be serviced by qualified service personnel when: the power supply cord or the plug 

has been damaged; or objects have fallen, or liquid has been spilled onto the product; or the product has 
been exposed to rain; or the product does not appear to operate normally or exhibits a marked change 
in performance; or the product has been dropped, or the enclosure damaged. 

Δ

 Do not drip or splash liquids, nor place liquid filled containers on the unit. 

Δ

 

CAUTION: 

No user serviceable parts inside, refer servicing to qualified personnel only.  Do not expose 

the circuit of the amplifier under any circumstances. 

Summary of Contents for 6750















Reviews: