Initial Setup Instructions
Page | 10
1.
Set popcorn popper on a level, dry surface. Gently squeeze the sides of the Olde Midway
front metal panel to detach, then remove all packing material and wipe inside of kettle and
popper with a dry cloth. DO NOT use harsh cleaners or abrasive chemicals. After the initial
setup, maintain a regular care and maintenance plan.
2.
Place kettle top onto the brackets. Slide the stirrer through the spacer and kettle top, then
screw clockwise into the gearbox. (Fig. 1)
3.
Place the kettle onto the support bracket, while holding, insert the hinge pin through the
kettle and support bracket. (Fig. 2) Insert the cotter pin through the end of the hinge pin to
lock kettle into place (Fig. 3)
4.
Connect the power plug from the bottom of the kettle into the outlet on the machine's
ceiling. (Fig. 4)
Note:
Never plug this cord directly into an electrical outlet.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Controls
WARM:
Turns the warming light on an off.
KETTLE:
Turns the kettle on an off, and
activates the stir function.
Accessories
Salt
1 Tbsp
Kernel Popcorn
Shaker Measure Scoop Scoop