DBV_v01_UK_FR_DE_IT_NL_SP
ENGLISH
INSTRUCTION
FOR
DRINKER
HEATERS
Ø20
CM
,
Ø25
CM AND
Ø30
CM
W
HAT TO FIND IN THE PACKING
1.
Drinker heater
2.
3 yellow connectors
3.
1 adapter
Place the 3 yellow connectors on the same way as on the picture
You can also fix them with the upstanding part inside to hold very small drinkers or pigeon
drinkers.
Check the label of the adapter if it has the same colour of label as the cable of the drinker
heater cable. If not do not use this adapter and return to your supplier.
Connect the adapter with the plug of the drinker heater. Connect to a power supply.
To avoid prevent getting water inside the drinker heater put the product on a higher location
(for example use tile of at least 5cmm height).
------------------------------------------------------------------------------------------------------------
IMPORTANT
INFORMATION
Never use this product upside down as this product have a very good insulation. Only use
like shown on the packing!
This product is to keep drinkers free of ice and is only sold for this purpose. Any other use is
not allowed. Not to be used for temperatures more than 10° Celsius.
Make sure the adapter or connection between the adapter and drinker heater plug will not be
wet or moist!
Make sure the drinker heater does NOT stand in water or moisture!
Never open the product yourself because any repair or replacement will not be covered by
the factory warrantee.
OLBA B.V. * PASTEURWEG 3 * 7741 LB COEVORDEN * THE NETHERLANDS