English
Stud Gun EPK-6,5, EPK-8
OKU Tools GmbH, 70374 Stuttgart, Germany
3
EN
1 Preface and general information
1.1General
The operating instructions is used for safe operation of the Stud Guns (in the follow-
ing referred to as “gun“) type Automatic Stud Gun EPK-6,5, EPK-8
(ID.-No. 00101069, 00101125, 00101071, 00102180). The safety instructions includ-
ed hereinafter must be observed.
The operating instructions must be available for anybody who is working with the gun
and the included instructions must be carefully attended to.
The operating instructions must always be complete and perfectly readable.
1.2 Scope of supply
The delivery normally consists of stud gun and the operating instructions. The parts
included in your delivery are stated in the accompanying papers.
These papers shall be checked for conformity, immediately after receipt of the goods.
OKU Tools GmbH does not provide any guarantee and/or accept any liability for de-
fects complained belatedly. Therefore:
•
Contact the forwarder immediately to complain visible transit damages.
•
Contact OKU Tools GmbH immediately to complain visible defects and/or incom-
pleteness of delivery.
1.3 Intended use
The gun is intended to be used only for the insertion of single and multi-flange spikes
into tyres of cars.
Any other use shall be deemed to be inappropriate!
1.4 Liability
The information, data and notes of this operating instruction were up-to-date when
passing for press. The specifications, illustrations and descriptions included hereinaf-
ter do not apply for any previously supplied guns.
We do not accept liability for damages and operating troubles caused by:
•
inappropriate use.
•
unauthorized modification of gun.
•
improper operation of the gun.
•
operating errors.
•
disregard of this operating instructions.
