OKTANTA EM4000 User Manual Download Page 5 | Manualshive

Page: 5 / 37

OKTANTA EM4000 User Manual Download Page 5

EMA Thickness gauge EM4000. User Manual

+7(812) 385-54-28

[email protected]

5

DEVICE APPEARANCE

Device appearance

The device has a colour liquid crystal screen for displaying measurement results.

The device is controlled using the keyboard. On the side of the device there is a USB-
C connector for connecting a charger. The device has a removable sensor that can be
easily replaced with a new one due to the presence of a quick-detachable connection.

Control buttons have the following functions:

“OK” button — turning on / off the device, as well as the navigation
button in the device menu;

“Return” button — allows one to return to the previous menu items, as
well as close the menu;

“Up” button — navigation in the device menu, zoom control in the A-scan
display mode, as well as control of gates;

“Down” button — navigation in the device menu, zoom control in the A-
scan display mode, as well as control of gates;

“Save” button — allows one to save the measurement results in the
memory of the device.

«
...
3
4
5
6
7
...
»

Summary of Contents for EM4000






































Reviews:

No comments