TOTAL POS SOLUTION COMPANY
OKPOS
Manual
Service
ZED POS
1. Configuration of Main Board
2. Configuration of Major I/O Ports
Appendix
1. Stand
2. Cable Cover
3. Rear Cover
4. Main Press
5. Internal System Configuration
6. Storage Replacement
Assembly / Disassembly
1. System On/Off
2. Touch Screen
3. Disk back-up and Recovery
4. Dual monitor (Optional)
5. Magnetic Stripe Reader (Optional)
System Installation
and Usage
1. Preview
2. Features and Specifications
3. Parts Description
System Introduction
<
15-inch Dual Monitor
>
Auto Detection
Power Button
<
9.7-inch Dual Monitor
>
Auto Detection
Power Button
Press the
‘
Auto Detection
’
button
6
Extended Mode : LVDS [extend] VGA
Clone Mode : LVDS [clone] VGA
Turn on power and boot it using OS
After click the Windows start button, select
‘
Setting
’
▶
‘
Control Panel
’
in order and click the
‘
Display
’
icon on the
‘
Control Panel
’
screen
After
‘
Display Registered Information
’
screen appeared, click the
‘
Advanced
’
button on
‘
Setting
’
tab
After select
<
Display Config
>
tab, select
‘
Display Configuration
’
Choose Resolution of Primary Mode and Secondary Mode (default 1054X768@60)
5
4
3
2
1
Installation
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
4. Setup of Dual Display
