Air sponge cleaning
6
Cleaning
5
Cleaning
Clean the filter components
Turn off the machine
As shown in the figure, grasp the handle of the
machine with the left hand and rotate the dust
cup counterclockwise with the other hand. When
the dust cup is rotated to the bottom, pull out the
dust cup outward.
Hold the dust cup and press the arrow
to take out the filter assembly. Clean
up the dust.
As shown in the figure, grasp the handle of the machine with the left hand and rotate the
outlet cover plate clockwise with the other hand.
Pull out the cover plate outwards. Rinse out the cover plate and the sponge with
water.Dry before use.
Clean the filter components regularly, because the mites in the
adsorbed cotton wool may not be killed, and will continue to breed. In
order to avoid secondary pollution, the filter components should be
cleaned after cleaning, or replace with new filter components.
Note
Air cover
AIR Filter Sponge
dust cup
Metal filter
HEPA
Dust cup reset
A.Put the filter element into the filter assembly at any position, and then push the filter
assembly into the dust cup at any position.When the filter unit is flat and cannot be moved
down, the unit is placed in place.
B.hold the host, press the disassembly dust cup component in the opposite direction,
push the dust cup into the bottom parallel to the inside, and rotate the dust cup clockwise
to the bottom
