H301-NIKON-TI-SR
User Manual
March 2015
www.oko-lab.com
Pa
ge
4
1x35-M single
For #1 35mm Petri-dish
1x60-M single
For #1 60mm Petri-dish
1xGS-M single
For #1 1’’x3’’ chamber slide
1xLABTEK-M single
For #1 Lab-Tek 1’’x2’’ chambered cover glass
1xLABTEK-II-M single
For #1 Lab-Tek II 1’’x2’’ chambered cover glass
Figure 2.Available sample holders.
3.
Available Lids
The following heated glass Lids are available for H301-NIKON-TI-SR :
H301-SLIDING-LID
: For easy sample loading and pipetting –
Included in code H301-NIKON-TI-SR
H301-KOEHLER-LID-2*
: Reduces chamber height to 23 mm and allows imaging under Koehler illumination
H301-INJECTION-LID-2*
: Heated glass lid with two small openings (sealed with flexible plastic) allowing injec-
tion or permanent access to the sample. Compatible only with sample holder 1x35
H301-LASER-INTERLOCK-LID-2*
: Heated glass lid with safety switch. Connects to laser controller and auto-
matically turns laser off when lid is lifted. Compatible only with sample holder 1x35
* OPTIONAL – not included with H301-NIKON-TI-SR