H301-NIKON-TI-SR
User Manual
March 2015
www.oko-lab.com
Pa
ge
13
10.
Connecting the Chamber with XY stage
Follow the steps shown in the images Figure 18 and listed below in order to correctly connect the chamber with XY
stage.
1.
Place the chamber on the stage and tighten 4 captive screws (See Figure 18 Image 1 and Image 2). Captive screws
housings are indicated with letter B in Figure 18 Image 2
2.
Use a 2.5mm metric Allen Wrench to tighten the four captive screws while keeping the chamber sliding lid open
(See Figure 18 Image 2)
Captive Screws
A
B
1
2
3
Figure 18. Connection of the Chamber with XY Stage
