H301-MINI
User Manual
Rev 02
www.oko-lab.com
Pa
ge
8
7.
Connection of the Gas Supply
A single silicon tubing carries output gas from the Okolab Gas Controller to the H301-MINI. Silicon tubing connects to a
gas input - brass opening - located on a corner of the H301-MINI. See Figure 11. Connect by gently pushing silicon tub-
ing onto brass opening.
Gas Input
Figure 11.Connection with gas supply.
8.
Working with Perfusion
The Chamber H301-MINI features 12 perfusion holes on the sides for the insertion of perfusion tubing up to 2.5 mm in
outer diameter. Small screws plug the perfusion holes when not in use. (
screws plug M3x0.5 THD
). Remove small
screws plug as necessary before introducing perfusion tubing.
Figure 12 shows location of perfusion holes.
1.Frontal view
2.3D view
Perfusion dedicated opening
Figure 12. Perfusion
