Figure 4. Introduction of the Sample Holder inside the Chamber Base.
1.4
Working with 35 or 60 mm Petri Dish
–
Spacing Rings and Magnetic Locks
Magnetic locks prevent movement of 35 and 60 mm dishes inside the sample holder.
Figure 5 illustrates the available magnetic locks for 35 and 60 mm dishes. Threaded magnetic posts
allow adjusting the holder's height.
Magnetic Locks for 35 and 60 mm petri dishes.
Included in the corresponding sample holder
Figure 5. Magnetic Locks for 35 and 60mm dish.
Note
►
Magnetic locks are included with sample holders.
Spacing rings accounting for variability in dish diameter from one manufacturer to another are also
included. Figure 6 shows how to position the ring. Ring selection guide diagrams: rings for 35 and 60 mm dish
-Figure 7 and Figure 8, respectively.
