H301-ALPHA3-SMALL
User Manual
REV 02
www.oko-lab.com
Pa
ge
5
4.
Working with perfusion
The Chamber H301-ALPHA3-SMALL features 2 perfusion holes on the sides for the insertion of perfusion tubing up to 1
mm in outer diameter. Follow the instruction below to work with perfusion:
1.
Use the supplied Stainless Steel Perfusion Tubes. Attach a Silicon tubes O.D. 1,6mm I.D. 0,8mm (not supplied) to
the Stainless Steel Perfusion Tubes (see image 1 in Figure 4).
2.
Insert the Stainless Steel Perfusion Tubes in the perfusion holes (see images 2 and 3 in Figure 4).
Insert a Silicon tubes O.D. 1,6mm I.D. 0,8mm (not supplied) to the free end of the Stainless Steel Perfusion Tubes
(see image 4 and 5 in Figure 4).
Figure 4. Working with Perfusion
