Okolab H201-NIKON-TI-S-ER User Manual Download Page 17

Page: 17 / 17

H201-NIKON-TI-S-ER

User Manual

August 2019

www.oko-lab.com

12.

Connection of the Chamber with XY stage

Once you have assembled the chamber with adapter you can place it on the XY stage, following the steps

shown in Figure 24.

Place the adapter on the stage (See Figure 24 Image 1).

Use the Grub screws to align correctly the adapter on the stage. Grub screws housings are indicated with letter A

in Image 2 of Figure 24.

Follow the arrows shown in Image 3 of Figure 24 for placing flat socket head cap screws; use the provided Allen

wrench for tightening the flat socket head cap screws and fastening the adapter on the stage. Screws housings

are indicated with letter B in Image 4 of Figure 24.

Screw M4x7

Screw M3x3

Figure 24. How to fix the

H201-NIKON-TI-S-ER to the XY stage.

Summary of Contents for H201-NIKON-TI-S-ER


















Search results

Summary of Contents for H201-NIKON-TI-S-ER

Reviews:

Related manuals for H201-NIKON-TI-S-ER

Brands by name

Popular brands

Okolab H201-NIKON-TI-S-ER, User Manual

Search results

Summary of Contents for H201-NIKON-TI-S-ER

Reviews:

Related manuals for H201-NIKON-TI-S-ER

Brands by name

Popular brands