33
•
TOP LED Settings.
The TOP LED settings allows you to establish when the TOP LED should be illuminated:
if you select
Never
, the Top LED will never illuminate; if you select
On Alarm
, the TOP LED will illuminate
only when CO2-UNIT-BL is in Alarm Status (see paragraph 9.1.2); if you select
Always
, the TOP LED will
always illuminate.
•
Glance Mode Setting
(see also paragraph 9.4). The Glance mode setting defines the color of the TOP LED
and of the digits displayed in Glance Mode. If you select
White
, the TOP LED illuminates in white color
(according to the criterion selected in TOP LED setting) and the digits displayed in Glance Mode are white.
If you select
Dynamic
the color of the TOP LED and the color of the digits in Glance Mode follow the color
coding reported in 9.1.2.
Tip
►
To swap between Icon and Glance mode press on the icon
(see paragraph 9.4).
9.2.2.4
Date & Time
To set Date & Time, follow the instructions below:
1.
Press the
Date & Time
icon
(see Figure 53 a).
2.
Set the values by using the
+/-
icons (1 and 2 in Figure 53 b).
Tip
►
Flag the 24 hours box, if you want to use the hour format based on 24 hours (3 in Figure 53 b).
3.
Click on
Save
to confirm (4 in Figure 53 b) or
Cancel
to undo.
a
b
1
2
3
4
Figure 53. Touch screen settings. Date and Time (a
–
b).
9.2.2.5
Alarms
CO2-UNIT-BL also allows activating visual and audible alarms.
To set the alarms specifications, press the
Alarms
icon
(see Figure 54 a), then follow the indications
below:
1.
Click on the Gas icon
to set the gas deviation for a period of time then the system triggers on Alarms, as
shown in the Figure 54 b.
Tip
►
Flag the Buzzer checkbox if you want the Alarm to be acoustical as well rather than just being
displayed.
