The corresponding number 1,2 or 3 will appear on the display.
1
: Low
2
: Medium
3
: High
Ion
The ion function is designed to purify the air by releasing negative ions to the air.
To activate this function, press
. The symbol
will appear on the display.
To deactivate this function, press
again and the symbol
will disappear from the display.
Automatic Humidity
1.
Repeatedly press
to select the desired humidity level.
•
The text “AUTO” will flash on the display.
•
The humidity range is between 45% RH to 90% RH with increments of 5% difference.
2.
The desired humidity setting will be confirmed after about 5 seconds.
•
The text “AUTO” will stop flashing.
•
The display will alternately show the current humidity and desired humidity setting.
NOTE:
If the room humidity is equal to or higher than the set humidity, the humidifier will stop producing
mist.
Timer
You can set the timer to turn off the humidifier after the set time has elapsed.
The timer allows the humidifier to operate from 1 to 12 hours.
To activate this function:
1.
Repeatedly press
to select the desired number of hours.
•
The text “Timer” will flash on the display.
2.
The desired timer setting will be confirmed after about 5 seconds.
•
The text “Timer” will stop flashing.
To deactivate this function:
Repeatedly ress
until the text “Timer” disappears from the display.
Auto Shut-Off
When the humidifier is empty, it will turn off automatically and the indicator light
will flash.
Turn off and unplug the humidifier before removing and refilling the water tank.
CLEANING AND MAINTENANCE
Before cleaning, turn off and unplug the humidifier from the mains socket.
To maintenance the performance of the humidifier, it is important to clean it
on a regular basis.
EN-5
Downloaded from www.vandenborre.be