4. While the gender icon is flashing, press
▲
/
▼
to select male ( ) or
female ( ) setting. Press SET to confirm.
• The height figures will flash on the display.
4
5
Weight unit button (on the bottom of the scale)
The scale will measure your weight in kilograms (kg), imperial pounds (lb) or stones (st).
Repeatedly press the button to select your choice.
NOTE: If the scale is set to KG mode, height will be displayed in cm.
If set to ST or LB mode, height will be displayed in feet and inches.
SETTING THE PERSONAL DATA
The scale can store the personal data of up to twelve people. Personal data includes gender, height and age.
2. While the personal data code is flashing, repeatedly press
▲
/
▼
to
select a personal data code.
3. Press SET to confirm.
• The gender icon will flash on the display.
Display
User memory
code
Gender
Hydration%
Fat status
indication
Fat%/Muscle%
Bone%
Height Unit
Age
Calorie Unit
Weight Unit
5. While the height figures are flashing, repeatedly press
▲
/
▼
to select
the height.
6. Press SET to confirm.
• The age figures will flash on the display.
7. While the age figure are flashing, repeatedly press
▲
/
▼
to select the
age.
8. Step on the scale electrodes. The display will show “0.0 kg”. You can now
start taking measurements.
TAKING A MEASUREMENT
1. Press SET to turn on the scale.
• The last user or default setting will be shown and the user code
will flash on the display.
2. While the user code is flashing, repeatedly press
▲
/
▼
to select a
desired code.
3. Step on the scale electrodes. The display show “0.0 kg”.
4. Step on the scale electrodes.
• Make sure that you are bare foot and that the soles of your feet are clean.
• Make sure that your feet are correctly positioned on the electrodes and that
you are standing with your weight evenly distributed on the platform.
• Remain still and do not move until the measurement is complete.
5. Your weight reading will be displayed first.
Once the reading is steady it will flash once.
6. The display will then show “ ” in a series whilst the calculation
is performed and then your measurements will be displayed.
The measurements will be displayed in a cycle of body weight (e.g. 52.8 kg), fat percentage (e.g. 23.8%),
hydration percentage (e.g. 52.3%), muscle percentage (e.g. 37.2%), bone percentage (12.0%) and
kilocalorie (e.g. 1840).
The readings will be displayed in a sequence of 3 cycles, after which the scale will turn off automatically.
Notes on Viewing Measurements
After you select a desired user code to view measurements (following steps 1 to 3 above), press
▲
to
display the measurements. The measurements will be displayed in a sequence of 3 cycles.
You can press
▲
/
▼
to quickly view measurements.
1. Press SET to turn on the scale.
• The default setting will be shown and personal data code will
flash on the display.
Summary of Contents for BFBamboo
Page 20: ...36 ...
