5.3 What to do in an emergency
R
Riissk
k tto
o lliiffe
e
Never get yourself into danger; give your own safety
top priority.
What to do in the event of a fire
• Switch off the heating system.
• Call your local fire department and / or 911.
• Use approved fire extinguishers (fire protection class ABC).
What to do if you smell smoke
• Switch off the heating system.
• Close the doors leading to living areas.
• Ventilate the boiler room.
5.4 Installation with an existing boiler
MESys boilers are not to be connected to a chimney flue serving another appliance. However, when all State
and local codes allow for the sharing of chimney flues, MESys boilers and another appliance burning pellets
or a different fuel can be operated simultaneously while connected to a single existing chimney or flue gas
system providing the following conditions are met:
• All state and local codes permit the specific installation.
• All appliances are installed in accordance with the manufacturer’s installation specifications or if lacking
manufacturers specifications, the appliance in question is installed in a manner commonly recognized as
safe and correct for the application and circumstances.
• The chimney or flue gas system must be able to handle the combustion products of either appliance and
both appliances when operated simultaneously.
A
Av
vo
oiid
d c
clle
ea
arra
an
nc
ce
e iissssu
ue
ess tth
ha
att c
ca
an
n m
ma
ak
ke
e sse
errv
viic
ciin
ng
g
d
diiffffiic
cu
ulltt::
Be sure to follow suggested clearances when installing
this boiler with an existing boiler to be sure that service
and cleaning can be performed adequately.
A
Av
vo
oiid
d c
co
od
de
e v
viio
olla
attiio
on
nss::
When connecting to or with an existing boiler, contact
the authority having jurisdiction to be sure the type of
installation planned is allowed.
Document the type of boiler that the Pellematic is con-
nected to or with.
Pellet boiler: Make and Model number:
____________________
Existing boiler: Make and Model number:
_____________________
PE 607 USA_FA 2.1
12
Summary of Contents for PELLEMATIC SmartXS
