User’s manual: FS-Reflexion
16
4.2.1
Control panel
Figure
shows the
Control panel
of the
Transmitter
with its switches and connectors.
Safety fuse
Operating lamp
Power on and
off button
Bluetooth
antenna
Socket for charging
Figure 6: Control panel of transmitter
The
Power on and off button
is used to power on (“
|
”) or off (“
”) the
Transmitter
. After switching-on
the device the green
Operating lamp
is shining. After switching-off the device the lamp will go
out. The
Operating lamp
indicates also the charge condition of the internal batteries. During the
operation the color will change according to the charge condition from green (full charged) to
yellow, orange or red (low batteries). When the lamp is shining red it is necessary to recharge
the
Transmitter
.
Into the
Socket for charging
the delivered charger has to be connected to recharge the internal
batteries of the
Transmitter
. The charging procedure takes about 10 hours if the batteries are
completely empty.
The
safety fuse
protects the
Transmitter
against high charging or discharging current. During the
usage of the delivered charger there is no danger.
Attention:
Use only the 16 A-safety fuse of same construction type if needed! Other safety
fuses or jumpers can cause fire or explosion.
OKM Ortungstechnik GmbH
