OkiOki Mid-Century, Instructional Manual

Page: 14 / 30

B: Identify the screw holes on the wall. First mark the point at the same
height on the wall as the L-shaped Metal Bracket (7) on the product. You
can find these same points in two ways as below:
1. Move the Dresser back to the wall and make these points on the wall
and make sure the products are at the same height.
2. Measure the height of the Metal Bracket (7) and the wall by using a
ruler in order to keep them the same height.
**(Caution: The Dresser Restraint Strap (8) between Metal Backets (7) on the product and
the wall should be within 3.5”.
)
3. Then fix one L-shaped Metal Bracket (7) on the mark on the wall by
the 5cm Self Tapping Screws (6).
4. Repeat this step to fix another Metal Bracket (7) on the wall as
shown above.
13