Copyright 2010. All Rights Reserved.
www.okinausa.com
- 2 -
REV122010-V17
Safety Warnings
1. Read manual carefully before installing the unit.
Please read this manual first for correct installation and operation.
2. Never install the camera on a ceiling that cannot hold its weight.
The product may fall down and cause damages.
3. Never install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices would distort the
video image.
4. Never install or use the camera in areas exposed to water, oil or gas.
The water, oil or gas may result in operation failure, electric shock or fire. Do not use this
unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, near a swimming pool, in an unprotected outdoor installation, or any area
which is classified as a wet location.
5. Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
6. Power Cord Protection.
Touching the wet power cord with hands or touching the power cord with wet hands may
result in electric shock.
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, playing particular
attention to cords and plugs, convenience receptacles, and the point where they exit
from the appliance.
7. Attachments
Do not use attachment not recommended by the product manufacturer as they may
cause hazards.
8. Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock,
Never spill liquid of any kind onto the product.
9. Do not operate the camera in environments where the temperature, humidity or
power source is beyond the specified ones.
Use the camera in suitable environments where the temperature is within -10
°
C~ 50
°
C
and humidity below 90%. The input power source is 12V DC.
