background image

Copyright © 2010. All Rights Reserved. 
www.okinausa.com 1 REV122010-V17 

1. Introduction 

SEMT-7680 and SEMT-7610 are built with Sony’s latest image processor, this 
super-wide dynamic camera has the capability of achieving resolutions of over 
680TVL or 610TVL respectively. The features include 2D noise reduction, spot 
removal, strong-light suppression, intelligent motion detection and OSD 
functions. SEMT-7680 and SEMT-7610 reproduces nearly perfect images like 
no other.

 

 
 

1.1 Main Features 

SEMT-7680 

„

  1/3" Digital Wide Dynamic Color Camera 

„

  Sony Exview CCD, Sony Effio-E DSP 

„

  Color: 610 TVL, B/W: 630 TVL 

„

  Color: 0.03 Lux @ F1.0, B/W: 0.005 Lux @ F1.0 

 

SEMT-7610 

„

  1/3" Digital Wide Dynamic Color Camera 

„

  Sony Super HAD CCD II, Sony Effio-E DSP 

„

  Color: 680 TVL, B/W: 700 TVL 

„

  Color: 0.05 Lux @ F1.0, B/W: 0.01 Lux @ F1.0 

 
 

„

 Mechanical Focus Adjustment 

„

  Mechanical IR Cut Filter (ICR) 

„

  Multi-Language OSD Control   

„

  ATR Digital Powerful 128x WDR (52dB) 

„

 Anti-Headlight (HLC) 

„

 2D Noise Reduction 

„

  High Contrast Images   

„

  Ideal for Backlight Environments 

„

  Mosaic Privacy Mask 

„

  Advanced Motion Detection Function 

„

  Picture Quality Adjustable (Contrast/Sharpness/Hue/Gain) 

„

  12V DC / 24V AC, 3.5W 

 

1.2 Content List 

„

  One (1) SEMT-7680 or SEMT-7610 camera 

„

  One (1) Female DC Connector 

„

  One (1) CS Mount Ring 

„

  One (1) DC Plug 

„

  One (1) Allen Wrench 

„

  One (1) Warning Sign Sticker 

„

  One (1) User Manual 

„

  One (1) CD 

 

*

 For any returns, please include all components listed above with original packaging in

 

Resalable Condition

Absolutely No Returns

 will be accepted if any component is 

missing/damaged or if any cable is cut or tampered with. 

Summary of Contents for SEMT-7680

































Reviews: