Okina HD21B54-K10, User Manual

Page: 5 / 16

5
HARDWARE RS485 WITH PTZ KEYBOARD SETUP
Default protocol is Pelco-D and default baud rate is 9600 for RS485 communication between
camera and PTZ controller.
NOTE: It is highly recommended that you run an additional cable for your RS485
communication from your camera. Some models may have RS485 setting in menu. Please
leave RS485 baud rate setting at 38400.
OSD OPERATION
OSD Main Menu
The menu consists of a main menu and sub-menu. Each
menu has a total of seven sub-menus of the camera
functions. Each sub-menu, the sub menu back to the
primary and secondary and tertiary sub-menu consists
of ENTER through the key mark from the primary to the
secondary can be moved to the third sub-menu.
LENS (AF) Control Mode – Zoom & Focus
Label Name Function
A/F MENU Quick Auto Focus Aiming
Button
Zoom-In (Tele)
Zoom-Out (Wide)
Focus-In (Near)
Focus-Out (Far)

Five Direction Key Operations:
OSD Control Mode
Label Name Function
A/F MENU ENTER Button
Up
Down
Left
Right

F1 Function Button
• Locking all control of the camera - Press 5 seconds
• Release from locking function - Press 5 seconds

F2 Function Button
• Only to the special purpose camera
Control distance
within 20ft / 6m.