http://www.okinausa.com
EIR48X-42VF_EIR56X-42VF922_rev051909
Model EIR48X-42VF
EIR48X-42VFP
EIR56X-42VF922 EIR56X-42VF922P
TV System
NTSC PAL NTSC PAL
Image Sensor
1/3” Sony CCD & DSP
Total Pixels
510(H) × 492(V)
500(H) × 582(V)
510(H) × 492(V)
500(H) × 582(V)
Video Output
1 Vp-p 75
Ω
Resolution
420 TV Lines
Minimum Illumination
0 Lux @ IR “on”
S/N Ratio
More than 52dB
Electronic Shutter
Automatic
Synchronization
Internal
Gamma Control
0.45
Gain Control
Automatic
White Balance
Automatic
Back Light Compensation
Automatic
IR LED
48 IR LED
56 IR LED
IR Wavelength
850nm
IR LED Life
Average 20,000 hours
IR Working Distance
30~130ft / 10~40m
130~160ft / 40~50m
Lens
4.0mm~9.0mm Vari-Focal Lens
9.0mm~22.0mm Vari-Focal Lens
IP Rating
Weatherproof IP65
Power Supply
12V DC
Power Consumption
110mA @ IR LED “off” / 430mA @ IR LED “on”
120mA @ IR “off” / 525mA @ IR “on”
Operation Temperature
-4
o
F ~ +122
o
F / -20
o
C ~ +50
o
C
Dimension
9.25”(L) x 3.375”(W) x 3.75”(H)
234.9(L) x 85.7(W) x 95.2(H) mm
(with sunshield cover & bracket)
11.0”(L) x 3.5”(W) x 4.0”(H)
279.3(L) x 88.8(W) x 101.5(H) mm
(with sunshield cover & bracket)
Weight
1.2 lbs / 544g
1.6 lbs / 725g
* Specifications are subject to change without notice
z
One (1) EIR48X-42VF/EIR48X-42VFP or EIR56X-42VF922/EIR56X-42VF922 Camera with power/video cable
z
Four (4) Mounting Screws
z
Four (4) Wall Anchors
z
One (1) Allen Wrench
z
One (1) Mounting Sticker Template
z
One (1) Operational Manual
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.
2.
Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3.
Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable temperature range for operation of this camera is between
-4
°
F ~ +122
°
F / -20
°
C ~ +50
°
C and the allowable humidity is 85%RH maximum.
4.
Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens installation or whenever the lens is changed. Cleaning should be done by using a
chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust.
5.
Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be connected to a surge protector at all
times.
6.
Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock. Never
spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all service
to qualified servicing personnel.
SPECIFICATIONS
CAUTIONS
LIST OF COMPONENTS
