TVD-04 / TVD-08 / TVD-16 / TVD-16-1U Quick Setup Guide
10
2. Startup and Shutdown
Startup
Step1: Connect with the source power.
Step2: The device will boot and the power LED would turn blue.
Step3 A WIZARD window will be pop-up
Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step1: Press Power button, the shutdown window will appear, click OK, the unit will shut down after a while.
Step2: Disconnect the power
By mouse:
Step1: Right click on the mouse, then select “Main Menu” the shutdown window will appear at the last
Step2: Click OK. Then the unit will power off after a while.
Step3: Disconnect the power
3. Wizard setup
After the device starts, a setup wizard pops up. You can set up time
，
network and disk management.
Click device name box to popup a keyboard as follow:
It supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click
Shift button again to return.
The default HTTP port is 80. The default server port is 6036. You can check “Obtain an IP address
automatically‟ to acquire network information or input IP address, subnet mask, gateway, preferred/alternate
DNS server manually. This function is used to monitor DVR through internet
Click Next button. This will take you to the HDD management window.
