Copyright © 2009. All Rights Reserved.
http://www.okinausa.com 6
Rev073109
NOTE: When selecting DC DRIVE, the shutter speed will be fixed at 1/60 (NTSC), 1/50 (PAL) which
the shutter mode is not selectable. When the shutter is set as FLK or MANUAL, SENS-UP will not
work.
Setup: White Balance
Setup: Back Light Compensation (BLC)
1.
Position the arrow to WHITE BAL in setup menu by UP/DOWN
button.
2.
Press LEFT/RIGHT to select WHITE BAL mode.
ATW: Auto Tracking White Balance
The camera will track the color temperature at a range between
1800°K~10500°K and keep white balance automatically.
AWC: Auto White Balance Control
AWC adjusts the white balance.
1.
Select AWC
2.
Place a white sheet of paper in front of the camera to
obtain the optimum state under current illumination.
3.
Press SETUP, the white balance is adjusted.
4.
Repeat step 2 when the light source is changed.
The function works when there is a strong back light behind the
object.
1.
Position the arrow to BACKLIGHT in setup menu by pressing
UP/DOWN button.
2.
Select the mode you wish to operate by pressing
LEFT/RIGHT button.
HIGH: The gain increases from 0dB up to 42dB
MIDDLE: The gain increases from 0dB up to 30dB
LOW: The gain increases from 0dB up to 18dB
OFF: BLC function is disabled
5
MANUAL
1.
Select MANUAL and press SETUP to enter into menu.
2.
Choose RED/BLUE by UP/DOWN and increase or decrease
the red and blue values thru LEFT/RIGHT buttons.
3.
Return to last menu by pressing SETUP while finishing
modification.
