1.
It is necessary to be reset manually after the initial installation and power off.
Note: The
A
nti-Collision function is not enabled during all resets. Please note that there is a potential
risk of pinching in this case, and be sure no obstacles in the desk
'
s path.
● Manual Reset
• Keep pressing
"
down
"
key till display shows
"
E-1
"
and
"
rES
"
alternately and
release the key.
•
Keep pressing "down" key again, the desktop will move slowly down and
return
bac
k
till the display shows "
0
6
0
"
or "2
3
.6"(Depends on your version of the
control box).
2.
• Release the key , the height-adjustable desk can be used normally.
3.
● Saving position
3.
● Up and Down
1.
• Keep pressing
"
up
"
key till the required height is reached.
2.
•
Keep pressing
"
down
"
key till the required height is reached.
rES
0
6
0
•
Adjust the desktop to the height you want to save.
•
Keep pressing
"
S
"
key
till the display will show
"
S -
-
"
.
• Press "1"
key
, the display will show
"
S-1
"
and the
current
height
alternately
.
•
Press "S" key, the first memory position is set successfully. Similar procedure
for "2" key and "3" key memory positions.
4.
S
1.
2.
By using memory function, the desktop can easily
be
programmed to preferred height positions.
S
▲
1
3
2
S
▲
5
Instruction
Summary of Contents for DF04.01
Page 2: ......