Commands Specific to OL400e (HP LaserJet Series IIP)
OL400e Function
Command
Notes
Select common character pitch ASCII: ESC & k # S Dec: 27
38 107 # 83
#=0: 10 cpi #=2: 16.66 cpi #=4:
12 cpi
Primary font default
ASCII: ESC ( # @ Dec: 27 40
# 64
#=0 or 1: makes default
symbol set active for primary
font in current orientation
#=2: causes printer to
re-evaluate best font choice for
current specified primary font
and primary symbol set in
current orientation.
#=3: makes primary font the
default font in the current
orientation
Secondary font default
ASCII: ESC ) # @ Dec: 27 41
# 64
#=0: makes default symbol set
the set for secondary font in
current orientation
#=1: makes secondary symbol
set same as default primary
font in current orientation
#=2: makes secondary symbol
set same as current primary
symbol set in current
orientation
#=3: selects default secondary
font in current orientation
Specify primary font symbol
set
ASCII: ESC ( # `ID' Dec: 27 40
35 `ID'
#=01 through 39 (see Symbol
Set Selection Commands table
below). ID=D, E, F, G, I, J, K,
M, N, Q, S, U, Y, Z, depending
on font to be engaged.
Specify secondary font symbol
set
ASCII: ESC ) # `ID' Dec: 27 40
35 `ID'
n=01 through 39 (see Symbol
Set Selection Commands table
below). ID=D, E, F, G, I, J, K,
M, N, Q, S, U, Y, Z, depending
on font to be engaged.
Specify primary font character
spacing
ASCII: ESC ( s # P Dec: 27 40
115 # 80
#=0: fixed (default)
#=1: proportional
#=-1: compressed proportional
Specify secondary font
character spacing
ASCII: ESC ) s # P Dec: 27 41
115 # 80
#=0: fixed (default)
#=1: proportional
#=-1: compressed proportional
Specify primary font character
pitch
ASCII: ESC ( s # H Dec: 27 40
115 # 72
#=characters per inch (cpi).
Default is 10 cpi.
