94
OKIPOS 425D
|
5.10 Auto Cutter Specifications
Structure
This cutter unit has a driving part. Its mechanism cuts recording paper partially (1 point remains) or fully, depending on the
motor driving direction that a user chooses. The movable blade cuts the recording paper by sliding.
Cutting Specifications
Cutting specifications:
Sliding type
Paper to be cut:
65 ~ 100 u thermal recording paper and plain paper
Available cutting width:
85 mm
Performance/Characteristics [ under initial, room temperature, normal humidity (20 C, 65%RH)]
Rated one rotation time:
500 m sec or less
Voltage:
DC24V + 10% (Voltage between motor terminals)
Starting Current:
1.6 A or less (at DC 24.0 V)
Dielectric resistance:
1M Ohm or more (in room temperature and normal humidity, measured between
the motor terminal and the cutter frame by 100 VDC megger).
Dielectric strength:
Should be no abnormality when AC100V is applied between the motor terminal
and the cutter frame for 1 minute.
Cutting frequency:
30 cuts/minute (2 seconds/cycle)
5.11 Ribbon Specifications
Genuine Oki Data cartridge ribbon
Ink color:
Black
Ribbon life:
Approximately 3 million characters (when 1 character = 14 dots)
5.12 Reliability
1
MTBF (mean time between failures)
10,000 hours of power-on time at 25% duty cycle. Page density: 35%
2
Printhead life
200 million characters (average) in Utility Print Quality mode.
3
Printer life
5 years of power-on time at 10 hours/day, 365 days/year.
4
MTTR (mean time to repair)
15 minutes, major sub-assembly level.
