6
Industry Canada Radio Interference
Statement for
230/240-Volt Models
This apparatus complies with the Class “A” limits for radio
interference as specified in the Industry Canada Radio Interfer-
ence Regulations.
European Union Council of the European
Communities
Statement of Electromagnetic
Conformance for 230/240-Volt Models
This product complies with the requirements of the Council
Directive 89/336/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility.
Statement of Safety
Conformance for 230/240-Volt Models
This product is in conformity with Directive 73/23/EEC on the
harmonization of the laws of Member States relating to electrical
equipment designed for use within certain voltage limits.
Federal Communications Commission
(FCC) Declaration of Conformity
for 120 Volt Models
1
. Product Identification
OKIPAGE 14e, model EN2909D
OKIPAGE 14ex, model EN2909A
OKIPAGE 14i/in, model EN2908A
2. Statement
This device complies with Part 15 Class B of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Radio Frequency Interference
(RFI)Statement for 120-Volt Models
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
It is the responsibility of the user to obtain the required shielded
cable in order to ensure compliance of this equipment with FCC
regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Industry Canada
Radio Interference Statement for 120-Volt
Models
This apparatus complies with the Class “B” limits for radio
interference as specified in the Industry Canada Radio Interfer-
ence Regulations.
FCC RFI Statement
for 230/240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
It is the responsibility of the user to obtain the required shielded
cable in order to ensure compliance of this equipment with FCC
regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
