18
OKIPAGE 4m/4w Plus
Installing Paper
The paper feeder handles up to 100 sheets of 75 g/m² (20 lb.)
paper.
1. Set the left paper guide to the marker for the required
paper size and move the right guide to a position slightly
wider than your paper width.
2. Insert the paper so that it is up against the left paper
guide and check that it is not skewed.
3. Adjust the right paper guide to fit against the edge of
the paper. Do not move the left guide again as this may
cause the paper to be skewed as it is fed in.
4. Lift the paper up out of the tray again slightly (about 1
cm) and reinsert gently, allowing it to drop under its
own weight. Do not force it down.
Note: Insert letterhead paper face-down top of page
first.
Paper Exit
•
Up to 30 sheets of 75 g/m² (20 lb.) paper can be stacked.
•
Printed pages exit face up.
4wPrgb.p65
7/14/97, 10:42
18